Any artwork placed in your layout will be saved within Publisher as embedded RGB by default. This is true of the Pack and Go utility built into Publisher as well. The Pack and Go collection utility is only relevant if all of your pictures and other graphics are using RGB color and you would like our system to do the conversion to CMYK color for you automatically.
If that is the case then to proceed with the Pack and Go:
File > Pack and Go > Take to a Commercial Printing Service
- Select the Next button.
- Select the Browse button then navigate to a place of your choosing and place it anywhere like and select the OK button.
- Select the Next button.
- Make certain that all three options are checked (Embed TrueType fonts, Embed linked graphics, and Create links for embedded graphics) and select the Next button.
- Select the Finish button. This will save a file with a .PUZ extension to the location that you chose earlier. This is the the file that you should upload.
- You may then either one or both of the two options (Print composite a proof and Print separations) and print a proof copy to be certain for the final output. If a Postscript printer is available then you may use the Print separations option. This will print a separate page for each ink color.*
* Note: If you get more (or fewer) pages then you expected then you should double check your color settings in the Color Printing area and then re-make the Pack and Go file.